Hanwha Wisenet SPI-50, Быстрое руководство

Страница: 8 / 12

Installation
8_ Installation
Specification
Items
Description
SPI-50
Operational
LED Type IR LED
Distance Performance 200m
Number of LED 9(EA)
Contiunously variable
angle
Fixed 25°
Wavelength 850nm
Automatic Control
Automatic IR On/Off control related to Camera Day&Night,
Brightness can be controlled during zoom operation
Communication
Between Camera &
illuminator
RS-485 9600bps(Techwin Protocol)
illuminator Identification
For one camera, use CH1 and CH2 IR light projector together as
one set.
Exterior
Weight(Kg) 0.9kg @1EA
Size(mm) (W)112 * (L)153.2 * (H)65.5
Material Al PC Cover
Electrical
Power 24V AC(±10%) / 2A @2EA
Power Consumption
MAX 24W(Brightness MAX)
Environmental
Operational
Temperature
-40°C ~ +60°C
Ingress Protection IP67
Certification EMC(FCC, CE, VCCI, RCM, KC)
 When using IR light projector, do not use CH1 and CH1 or CH2 and CH2 together as one set.
Specification
How to set Ir illuminator channel
1.
Open the round cover on the back of the IR
illuminator.
2.
You can set the illuminator channel using the DIP
switch in the DIP switch cover.
Use only the 2nd DIP switch to set the illuminator
channel.
(The 1st and 3rd DIP switches are used to test
devices at the factory. Always set them to OFF.)
` Refer to the settings below.
When set to channel 1 When set to channel 2
J `
Do not allow the settings to be changed by anyone other than the persons who install or manage
the product. Incorrect settings may cause the product to malfunction.
`
When shipped from the factory, two IR illuminators are set to different channels as Ch1 and Ch2.
If two IR illuminators are set to the same channel, communication errors will occur and they
cannot be used normally.
Used when setting channels
DIP switch