background image

overview

4_

 overview 

Class   construction

An apparatus with CLASS   construction shall be connected to a MAINS socket outlet with a 

protective earthing connection.

Battery

Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as 

sunshine, fire or the like. 
The battery cannot be replaced.

Disconnection Device

Disconnect the main plug from the apparatus, if it’s defected. And please call a repair man in 

your location.

When used outside of the U.S., it may be used HAR code with fittings of an approved 

agency is employed.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. 

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. 

ATTENTION

IL Y A RISQUE D’EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UNE BATTERIE DE 

TYPE INCORRECT.  

METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS.

CAUTION

These servicing instructions are for use by qualified service personnel only.  

To reduce the risk of electric shock do not perform any servicing other than that contained in 

the operating instructions unless you are qualified to do so. 
Please use the input power with just one camera and other devices must not be connected.
The Micro USB port of the product is provided for easier installation, and is not recommended 

for monitoring purposes.
When a new product box is opened (or during the initial use of the product), moisture might 

build up on the glass of the camera. The built-up moisture disappears naturally within a few 

hours after powered on.

The ITE is to be connected only to PoE networks without routing to the outside plant.
The wired LAN hub providing power over the Ethernet (PoE) in accordance with 

IEEE 802.3af shall be a UL Listed device with the output evaluated as a Limited Power 

Source as defined in UL60950-1 or PS2 as defined in UL62368-1.
Unit is intended for installation in a Network Environment 0 as defined in IEC TR 62102. 

As such, associated Ethernet wiring shall be limited to inside the building.

Please read the following recommended safety precautions carefully.

 

~

Do not place this apparatus on an uneven surface.

 

~

Do not install on a surface where it is exposed to direct sunlight, near heating equipment or 

heavy cold area.

 

~

Do not place this apparatus near conductive material.

 

~

Do not attempt to service this apparatus yourself.

 

~

Do not place a glass of water on the product.

 

~

Do not install near any magnetic sources.

 

~

Do not block any ventilation openings.

 

~

Do not place heavy items on the product.

 

~

Please wear protective gloves when installing/removing the camera. 

The high temperature of the product surface may cause a burn.

User’s Manual is a guidance book for how to use the products.
The meaning of the symbols are shown below.

 

~

Reference : In case of providing information for helping of product’s usages

 

~

Notice : If there’s any possibility to occur any damages for the goods and human caused by 

not following the instruction 

  Please read this manual for the safety before using of goods and keep it in the safe place.

We do not guarantee the quality of third-party products (e.g. lenses, accessories) that you 

separately purchase.

In particular installation environments, there might be interference in radio communications. 

When interference of electromagnetic waves occurs between the product and radio 

communication device, it is recommended to keep a certain distance between the two or 

change the direction of the receiving antenna.

WARNING

To Prevent damage which may caused by IR LED, don't stare at operating lamp.

For below models only.

QNV-C9011R/QNV-C8011R

Risk Group 1 (Groupe de Risque 1)

WARNING  IR emitted from this product. 

Do not stare at operating lamp.

MISE EN GARDE - IR émis par ce produit 

Ne pas regarder fixement la lampe.

Product tested against IEC 62471

Содержание QNV-C9011R


























Отзывы: