Hanwha Vision QNO-C8083R, Руководство пользователя

Страница: 12 / 37

12_
outdoor vandal dome camera
outdoor vandal dome camera
Inserting a Micro SD card
Insert the micro SD card into the micro SD card slot on the camera body in the arrow direction.
J ` Before installing the camera, the Micro SD card should be inserted while the power source and the body are separated.
` Do not forcefully insert it in the reverse direction. It might damage your Micro SD card and your product.
` When it rains or the humidity is high, insertion or ejection of a Micro SD card is not recommended.
` When installing/removing the Micro SD card, make sure you put the product body on a flat ground before working on it in order
to prevent accidents due to loss or drop of any parts.
`
Disassembly of the product cover should be finished within 5 minutes, or there will be the risk of internal dew condensation.
Removing a Micro SD card
Gently press down on the exposed end of the Micro SD card as shown in the diagram to eject the Micro SD
card from the slot.
J
`
Before removing the Micro SD card, in < Setup ( ) >-< Event >-< Storage >, set the device to < Off > and press the [ Apply ]
button and turn the camera off.
`
If you turn off the camera or remove the Micro SD card that contains data from the product, the data may be lost or damaged.