Hanwha Vision QND-7022R, Руководство пользователя

Страница: 11 / 40

English _
11
!
OVER
VIEW
AT A GLANCE (QNO-6014R/7012R/7022R/7032R/6084R/7082R)
Appearance
Item Description
a
Micro SD Card slot (Internal space of the product) This is a slot in which you can insert a Micro SD card.
b
Reset Button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
c
Test monitor out port
Output port for test monitoring the video output. Use the test monitor cable to connect to a
mobile display and check the test video.
d
Sunshield fixing screw
It fixes the sunshield with the camera.
e
Sunshield It protects the camera from the direct sunlight.
f
Zoom/Focus Control Button
(QNO-6084R/7082R)
T Zoom in (Tele)
W Zoom out (Wide)
N Focusing on a near object (Near)
F Focusing on a far object (Far)
Focus Control Press this button for automatic focus control.
<QNO-6084R/7082R>
<QNO-6014R/7012R/7022R/7032R>
bc
d
a
e
c
f
d
e