Hanwha Vision PNM-C16013RVQ, Руководство пользователя

Страница: 10 / 32

overview
10_
overview
AT A GLANCE
Appearance
a
b
c
d
Item Description
a
Top case Case cover used to protect the main unit.
b
Dome cover
Case cover used to protect the lens and the main unit.
c
Camera body Body part where the camera lens and connection terminals are included.
d
Mount plate
Plate that fixes the camera when mounting it to the ceiling or attaching it to a separately
sold mount.
Components
a
c
b
d
e
Item Description
a
Illumination Sensor Detects incoming light to control the IR LED.
b
Lens 4 camera lenses show different directions.
c
IR LED
These infrared LED’s are controlled by the illumination sensor.
d
Reset Button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
e
MICRO USB port
Port to connect the WiFi dongle.
You can check the installation video through the applications installed in the smartphone.
Refer to “
Connecting WiFi ” on page 22.
The Micro USB port only for installation, and do not use it while operating the product.
` Wifi dongle and OTG adapter are sold separately.