Hanwha Vision ANE-L7012L, Руководство пользователя

Страница: 11 / 25

English _
11
!
INST
ALLA
TION & CONNECTION
INSTALLATION
J
`
This camera is waterproof and in compliance with the IP67 spec, but the jack connected to the external cable is not. You are
recommended to install this product below the edge of eaves to prevent the cable from being externally exposed.
Precautions before installation
Ensure you read out the following instructions before installing the camera:
~ It must be installed on the area (ceiling or wall) that can withstand 5 times the weight of the camera
including the installation bracket.
~
Stuck-in or peeled-off cables can cause damage to the product or a fire.
~ For safety purposes, keep anyone else away from the installation site.
And put aside personal belongings from the site, just in case.
~
If the product is installed with excessive force, it may cause damage to the camera due to malfunction.
Forcing assembly using non-compliant tools may damage the product.
Disassembling
1. Hold the camera body with both hands as
illustrated and use thumbs to rotate the groove
of the base anticlockwise to unlock the middle
cover.
2.
Remove the middle cover by lifting it.
installation & connection
Installation
1. Consider the direction to be monitored, attach the template, and
drill holes by following the template.
`
Set the < > mark printed on the template to face the direction of camera
monitoring.
2.
Connect the camera internal terminal with the corresponding cable.
3. Using 2 tapping screws, fix the camera at 2 holes drilled with a
template.
4.
Remove all protective films from the camera
windows.
5. Unfasten the inner cover bracket until loose.
6. Adjust the lens in a desired direction by referring
to the “
Adjusting the monitoring direction for
the camera ” section. (page 13)
7. Push the colored camera part
upward in the direction of the
arrow, and tighten the screws in the
direction perpendicular to the ceiling.
J
`
Don’t install the screws at an angle.
OR