Hanwha Techwin Wisenet XRN-3210B4 Скачать руководство пользователя страница 27

Страница: 27 / 118

English

_27

digital Zoom

You can zoom in or out the video via digital zoom.
Select the desired channel and click < >.
Enters the digital zoom mode.

In PTZ mode, click < > to run the digital zoom.

•

: Exits the digital zoom mode.

• / : Zooms in or out the video.
• Minimap : When the video is enlarged 10%, a minimap is displayed. You can quickly check the desired location

in the enlarged video through the mini-map.

Audio output

You can turn the sound on/off corresponding to the channel in Live mode.
Select the desired channel and click <

Audio output can only be turned on in one channel. The audio output of other channels will be automatically turned

off.

If you have configured the audio output settings properly but the audio or voice is not output, check if the connected network

camera supports the sound signal and if you have configured the sound settings as appropriate.

The sound icon can be displayed if the sound signal fails to output from noise.

Only the channel where <

Audio

> is set to <

> in "

Setup

Camera

Channel Setup

" displays the audio icon ( ) in Live

mode that you can use to turn the sound on/off.

display text

You can monitor texts regarding the sales record received from POS in real time.

This is executable when a text device is connected.

The Recorder can display text on a live screen when a text device is set. For details, refer to the "

Setup

Setting the Device

Text

" page in the Table of Contents.

Select the desired channel and click < >.
When text information occurs, the text information is displayed in the corresponding video window.
Also, when a set text event occurs, the corresponding part of the text is displayed in a separate color.

Onions 3.59
CHIP 2.37
Apple 2.69
Goat 0.79
Peppers red, loose 0.59
2 x 0.79 1.18
Pasta 0.59
2 x 0.59 1.18
========================
TOTAL 3.63

> appears when text information crosses the screen. Click <

> to display a popup window where you can

check the entire content.

●

live

Содержание Wisenet XRN-3210B4























































































































Результаты поиска

Содержание Wisenet XRN-3210B4

Отзывы:

Hanwha Techwin Wisenet XRN-3210B4, Руководство пользователя, Страница: 27 / 118

Результаты поиска

Содержание Wisenet XRN-3210B4

Отзывы: