SHD-1600FPW
_
7
ENG
5.
Fix the ANCHOR BOLT onto the concrete CEILING, and secure the SAFETY WIRE to the
ANCHOR BOLT as below:
➊
Tighten the nut (“N1”) on the ANCHOR BOLT.
➋
Insert the provided SAFETY BRACKET into the ANCHOR BOLT.
➌
Tighten two nuts (“N2”,”N3”) onto the ANCHOR BOLT.
➍
Hook and fix one end of the SAFETY WIRE onto the SAFETY BRACKET.
➎
Hook and fix the other end of SAFETY WIRE onto the HOUSING as shown below.
ANCHOR BOLT
CEILING
CEILING
※
The ANCHOR BOLTs and nuts are optional and not included in the product package.
Nut (N1)
ANCHOR BOLT
Safety BRACKET
Nut (N2,N3)
SAFETY WIRE
HOUSING
6.
Push the HOUSING inside the CEILING through the CEILING hole, and tighten the
SCREWs (x3) clockwise to fix the HOUSING on the CEILING.
(Adjust the height of the bracket to secure the housing to the ceiling.)
M
`
Using a power tool for installation could cause product damage.
If you are going to use a power tool, the torque must be 30 Nm or less.
`
Ensure that the HOUSING is firmly secured to the CEILING BOARD.
BRACKET
CEILING
CEILING
HOUSING
