42_ camera operation
camera operation
- If the size is greater than the max size or smaller than the min size, motion is not
detected. To avoid false detection caused by noises, set the max/min detection size
suitable for the installation environment.
But the same movement in the same location can cause a different detection size. So,
include margins when you set the min/max detection size.
EXIT
Select a desired EXIT mode using the Function Setup switch depending on the camera
purpose.
y
SAVE :
Save the current settings and exit the MAIN SETUP menu.
y
NOT SAVE :
Do not save the current settings and exit the MAIN SETUP menu.
y
RESET :
Revert camera to factory settings. (The language, communication and lens
settings will remain the same).
M
`
To turn off the power after setting the camera menu, the OSD menu must disappear first.
