14_ introduction
introduction
1
Dome Cover
2
Rotate base :
control rotating angle of camera.
3
Vari-focal Lens Module :
3.2 ~ 10mm (F1.6).
4
Function Setup switch :
Display the menu on the screen and move the cursor to four directions
to confirm status or after changing a selected item.
Simple Focus: Press the SET button for more than 2 seconds.
Switching between AHD and CVBS modes: Press the SET button for more than 5 seconds.
5
Video Output Terminal to Monitor
6
Pan base :
Control panning angle of camera.
7
Power Input Connector
8
Ground Terminal
9
MD Output Terminal:
Motion detection signals are output through this terminal.
❿
Video Output Jack :
Video signals are output through this port. Connect this port to the Video IN
port of a AHD DVR.
⓫
IR LED :
These infrared LED’s are controlled by the illumination sensor.
⓬
IIIumination sensor :
Detects incoming light to control the IR LED.
HCV-6080R
TOP
FRONT
2
3
4 5
❿
8
7
1
9
⓬
6
⓫
