6. Memory Capacity
This receiver stores a total of 16 telephone numbers. When all the telephone numbers are
stored, new messages are received. Since the messages are deleted sequentially, starting
with the first memorized message, important telephone numbers can be prevented from
being deleted by protecting them beforehand.
7. Erasing Signal Receiving Area Display
In case the receiver goes out of the receiving area for 4 minutes or longer , the “ ”
indication on the screen disappears as follows. During this state, the message receive is
impossible.
8. Displaying Low Voltage
In case the battery capacity falls below a tolerance value, the receive displays low voltage
on the screen as follows and at the same tine low voltage alarm tone is activated.
9. Protection and Releasing of Received Message
A maximum of 12 messages can be protected in order to prevent the received message
from being deleted when receiving a new message. The following is displayed during the
message protection operation after 12 messages are protected.
< All the 12 messages gave been protected >
¡ Ø
The user should be careful since the message is not protected without batteries.
