HANTEL HTT-800A Скачать руководство пользователя страница 43

Страница: 43 / 105

CDMA WLL User’s Guide

HTT-800A

43-

1. Pick up the telephone handset and Press

“36*#02”

2. Press “3” to enter Emergency call number store

step

Note:

If you want to Delete at this point, Press

“4” to save (except 5, 6 step). If you want to

Delete All at this point then Press “5” to save

(except 4, 5, 6 step).

3. Press “Lock code” (4 digits)

4. Press one of “Memory number” for Emergency

call number(01-03)

5. Press the “digits” (Max 32 digits)

6. If you want to store more Emergency call

number continue from step2

7. Press <*> to save.

5.1.4 Hot Line

1. The designated number will be automatically

dialed when you pick up the handset without

any key press.

2. The Hot Line function operates only when the

phone number is saved at hot line number, and

when the hot line function is enabled. Hotline

operates in 2 modes;

Timed Hot Line:

The call will be made in

Содержание HTT-800A










































































































Результаты поиска

Содержание HTT-800A

Отзывы:

HANTEL HTT-800A, Руководство пользователя, Страница: 43 / 105

Результаты поиска

Содержание HTT-800A

Отзывы: