CDMA WLL User’s Manual HTP-800/1900/810
39
using the Smart Card interface standard ISO/IEC 7816. R-UIM Specification is TIA/EIA/IS-820 and R-UIM
Addendum1 is TIA/EIA/IS-820-1.
7.6.2 Card connect
1. open the battery & UIM cover under the phone case
2. connect the UIM card as blew
3. put the cover back on after phone connection test
(Before Connect) (After Connect)
NOTE : Turn off the phone whenever you insert or remove UIM card.
1.
Press <Menu>, <7> and <7(IP)> in sequence.
2.
Press <*(
▲
)> or <#(
▼
)> to select <1. Enable/Disable)>
If you selected disable, you can’t use IP function. And If you selected Enable, you can use
IP function.
3.
Press <*(
▲
)> or <#(
▼
)> to select IP Number, <2. IP No. setup)>
4.
Press IP No.(Example 17911 etc.,)
5.
Press <Store>
IP(Internet Phone) function is used to only China.
7.7 IP Function