User Manual
28
Steps to set the output list:
1. Select the output channel
Press the channel button on the front panel to select the output channel, and press "Output
List" to enter the output list setting interface.
2. Create a list
◆
Add/remove step
Press the "Add" soft key to insert a new step below.
Press the "Delete" soft key to delete the current step.
Press the "Clear All" soft key to clear all steps.
◆
Set list output
Use the arrow keys to move the cursor to position, and use the numeric keyboard to set the
output voltage and current. Press "×" to delete, press "Enter" to confirm and exit editing.
◆
Set output dwell time
The "Time" column is used to set the running time of each step output, the unit is s, and the
setting range is 0.01-3600s.
◆
Set trigger response
Press the "Enter" key to set the trigger response.
BOST: Choose whether to output the trigger signal before the current step starts to run.
EOST: Choose whether to output the trigger signal after the current step operation ends.
3. Set list properties
Press "Properties" to enter the list property setting interface.