Remote Control
CN
9
Remote Control
The internal resistance tester can be remotely controlled in the following three
methods:
1
、
User-defined programming:
The Standard Commands for Programmable Instruments (SCPI) command can be
used to control the internal resistance tester. Please refer to HBT3000-SCPI for
detailed instructions on commands and programming.
2
、
Use IO software:
The user can use the IO software to send commands for remote control of the
internal resistance tester. PC software IO provided by Keysight is recommended.
You can log in to Keysight official website (www.keysight.com) to download the
software.
operating steps:
⚫
Establish communication between internal resistance tester and computer
⚫
Run IO and search for internal resistance tester resources
⚫
Open the Remote Command Control panel and send the command
The internal resistance tester can communicate with PC through the following
interfaces
：
1
Controlled through USB
2
Controlled through LAN
3
Controlled through RS232/485
The manual will provide detailed instructions on how to use the IO software
provided by Keysight to remotely control the internal resistance tester through
various interfaces.
