Hantek DMM-365A, Руководство пользователя

Страница: 27 / 36

Operating Data Logger
USER’S MANUAL 25
Connect Data Logger probes (HT325) with DMM-365 as illustrated in the following figure:
Figure 2-15
Then, the following figure will be displayed on the screen:
Figure 2-16 Diode Measurement
To perform an On-Off test, follow these steps:
1) Click the
“CONTI” key and then On-Off indictor appears on the top of the screen.
2) Connect the black lead into the COM banan
a jack input and the red lead into the V/Ω/C banana
jack input.
3) Connect the red and black leads to the tested points. If the resistance value of the test points is
less than 1
0 Ω, you will hear beep sound from the test tool.
Connect Data Logger probes (HT325) with DMM-365 as illustrated in the following figure:
Figure 2-17