3.2 Waveform Output Control
By the following buttons to control the output dot numbers, trigger mode, output amplitude,
and limit frequency of the wave filter.
Single Wave:
Output waveform only once.
-20dB
: Attenuation the waveform
Ext Trig:
Use the external or internal trigger system.
Wave ON/OFF:
Turn the waveform on/off.
Ext Trig Mode:
External Trigger Mode (see “External Trigger Input”).
Phase:
The phase of the waveform to generate.
Y Offset:
The offset of the waveform to generate.
Frequency:
The frequency of the waveform to generate (The Frequency Range is
DC~75MHz when generating sine waveform, or DC~25MHz when generating other
waveforms).
Amplitude:
The maximum voltage of the waveform to generate.
USER’S MANUAL 19
Hantek1025G