EN
Connecting cables
Having set up the device, proceed to make the various input signal connections:
ANTENNA TV:
Terrestrial antenna cable connector (12).
PC DVI:
Connector for DVI-D signals at input (3), AUDIO signals at input (2).
PC RGB:
PC VGA connector at input (4), PC AUDIO at input (2).
Component:
RCA (Y, Pb, Pr) connectors (6), AUDIO at input (7).
S-VIDEO:
S-Video connector at input (1), AUDIO at input (7).
Scart 1:
SCART connector at input (6).
Scart 2:
SCART connector at input (7).
AV:
RCA connector at input (5), AUDIO at input (7).
Power cable:
Connector for main power cable (13).
Line out:
RCA connector at output (8).
SPDIF:
Connector for optical fiber to Home Theatre at output (9).
Turn on the monitor at the ON/OFF switch on the rear part of the monitor; the monitor will be in
STAND-BY mode (LED red). Press the STD-BY key on local keyboard or remote control to switch on
the TV (green LED).
CONNECTIONS
If there is no valid input signal, the “no signal” indication will appear on the screen.
If last source selected was Digital Terrestrial TV (DTV), please wait a few seconds for MHP module to
load.
Controlling the monitor from the remote control
The remote control provided may be used to perform all television functions.
Once you have entered the OSD menu, if no buttons are pressed for some time, the menu will be
automatically disappear.
*Scart 1 video output is always connected to TV source.
**Scart 2 video output is connected to active source.
__________________________________________________________________________________________
LCD 32 – 40 TV
3
.3