HANSONG HSBT3031-08, Руководство пользователя

Страница: 30 / 34

HSBT3031-08 module_datasheet Version2.0– Jun. 15 th
HANSONG ( NANJING) TECHNOLOGY CO.,LTD
30
14 FCC ISED Statement
FCC
Important Notice to OEM integrators
1. This module is limited to OEM installation ONLY.
2. This module is limited to installation in mobile or fixed applications, according to
Part 2.1091(b).
3. The separate approval is required for all other operating configurations, including
portable configurations with respect to Part 2.1093 and different antenna
configurations
4. For FCC Part 15.31 (h) and (k): The host manufacturer is responsible for additional
testing to verify compliance as a composite system. When testing the host device for
compliance with Part 15 Subpart B, the host manufacturer is required to show
compliance with Part 15 Subpart B while the transmitter module(s) are installed and
operating. The modules should be transmitting and the evaluation should confirm that
the module's intentional emissions are compliant (i.e. fundamental and out of band
emissions). The host manufacturer must verify that there are no additional
unintentional emissions other than what is permitted in Part 15 Subpart B or
emissions are complaint with the transmitter(s) rule(s). The Grantee will provide
guidance to the host manufacturer for Part 15 Subpart B requirements if needed.
notice that any deviation(s) from the defined parameters of the antenna trace, as
described by the instructions, require that the host product manufacturer must notify
to
Hansong (Nanjing) Technology Co,LTD.
that they wish to change the antenna trace
design. In this case, a Class II permissive change application is required to be filed by
the USI, or the host manufacturer can take responsibility through the change in FCC
ID (new application) procedure followed by a Class II permissive change application.
When the module is installed in the host device, the FCC ID label must be visible
through a window on the final device or it must be visible when an access panel, door
or cover is easily re-moved. If not, a second label must be placed on the outside of the
final device that contains the following text: “
Contains FCC ID: XCO-QCC3031 ”. The
FCC ID can be used only when all FCC compliance requirements are met.
(1) The antenna must be installed such that
20 cm is maintained between the antenna
and users,
(2) The transmitter module may not be co-located with any other transmitter or
antenna.
In the event that these conditions cannot be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is