TFT-LCD Monitor
9
(
Windows 95)
Microsoft
®
Windows
®
95 Operating System
.First determine the Windows 95 version installed on your computer by right-clicking the My Computer icon on PC and
selecting Properties. The version number is listed under System. Perform the steps for the appropriate version.
Version 4.00.950A
1. Click
Start
,
Settings
,
Control Panel,
and then double-click "Display" icon.
2. In the "Display Properties" window, click the "Settings" tab and click "Change Display Type".
3. In the "Change Display Type" window, click "Change" and then click "Have Disk".
4. Click "browse.." button and specify A:\(D:\driver) and click "OK".
5. In the Select Device window, click the appropriate monitor model and then click OK.
6. Continue choosing "Close" button and "OK" button until you close the "Display Properties" dialogue box.
Version 4.00.950B
1. Click
Start
,
Settings
,
Control Panel,
and then double-click "Display" icon.
2. In the "
Display Properties
" window, click the Settings tab and then click "
Advanced Properties
" button.
3. In the "
Advanced Display Properties
" window, click the "
Monitor
" tab and then click "
Change
" button.
4. In the "
Select Device
" window, click "
Have Disk
" button.
5. Click "
browse..
" button and specify A:\(D:\driver) and click "
OK
".
6. In the "
Select Device
" window, click the appropriate monitor model and then click "
OK
".
7. Continue choosing "
Close
" button and "
OK
" button until you close the "
Display Properties
" dialogue box.
Microsoft
®
Windows
®
NT Operating System
1. Click
Start
,
Settings
,
Control Panel,
and then double-click
Display
icon.
2. In Display Registration Information window, click Settings Tab and then click All
Display Modes
.
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then click
OK
.
4. Click
Apply
button if you see the screen working normally after clicking Test. If the screen is not normal, change to
a different mode (lower mode of resolution, colors or frequency).
Note
: If there is no Mode at
All Display Modes
, select the level of resolution and vertical frequency by referring to the
Preset Display Modes in the user guide.
(Linux)
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a type of system setting file.
1. Press Enter at the first and the second screen after executing the X86Config file.
2. The third screen is for
setting your mouse
.
3. Set a mouse for your computer.
4. The next screen is for
selecting a keyboard
.
5. Set a Keyboard for your computer.
6. The next screen is for
setting your monitor
.
7. First of all, set a
horizontal frequency
for your monitor. (You can enter the frequency directly.)
8. Set a
vertical frequency
for your monitor. (You can enter the frequency directly.)
9. Enter the
model name of your monitor
. This information will not affect the actual execution of X-Window.
10. You have
finished
setting up your monitor.
Execute
X-Window after setting other requested hardware.
(Windows NT)
