1 Explanation of symbols
Symbol indicates possible hazard, ignoring this warning could cause serious injury or death.
Important pay attention ! Failure to observe this note can cause material damages and effect the operation of the product.
Note : Additional information relative to the use of the project
2 General safety instructions
The manufacturer does not assume any liability for damages in the following cases :
●
Damage to the product resulting from improper use
●
Changes to the product without express permission from the manufacturer
●
Use for the purpose other than those described in the operating manual
●
Non compliant installation and or connections
●
●
●
3 Intended use
This appliance can only be used to cook food. Any other use is deemed incorrect and therefore hazardous. The
manufacturer declines liability for damage to property and injury to persons caused by improper, incorrect or irresponsible use.
4 Installation
CAUTION!
Before installation, check that the local distribution conditions (gas type and pressure) and the settings of the appliance are
compatible. The adjustemnt conditions for this appliance are provided on the label (or on the data plate). This appliance is
not connected to a combustion product evacuation system. It must be installed and connected in accordance with the installation
rules in force. Special attention must be given to relevant ventilation governing permissions.
4.1 Installation hole
CAUTION!
The appliance should be kept way from flammable materials
this appliance belongs to class 3 : Appliance to be built into a kitchen unit or work top.
Minimum distance to observe from the walls.
Distance
Built in hole dimensions
Make the hole in the cabinet as shown in the Fig 3 page 3.
The cabinet must be parallel to and flush with the horizontal work top.
The cabinet built in hole must be parallel. If the cabinet has aeration openings, prevent combustible materials from accessing these
openings.
