Hanseatic WQP12-J7713G, Руководство пользователя

Страница: 48 / 70

Page EN-12 Dishwasher detergents, rinse aids and dishwasher salts
Adding dishwasher salt
NOTICE
Risk of damage!
You may damage the dishwasher and
its stainless steel surface, its seals and
fi lters by using dishwasher salt in an im-
proper manner.
■
Only use regenerating salt which is
suitable for dishwashers.
■
Always wipe away split dishwasher
salt immediately with a damp cloth.
■
Immediately after adding the dish-
washer salt, launch a wash pro-
gramme.
You do not need to add dishwasher
salt to the dishwasher salt dispenser
– if you are only using multitabs which al-
ready contain dishwasher salt,
– if the water hardness in your area is in the
0–5° dH range.
(3)
Add dishwasher salt:
– prior to using the dishwasher for the first
time,
– when the “add dishwasher salt” display
(3) lights up.
(17)
1. Remove the lower dish rack.
2. Turn the cover of the dishwasher salt
compartment (17) in an anti-clockwise di-
rection and remove it.
3. Upon first use: Add 1.5 l of water into the
dishwasher salt dispenser to prevent the
dishwasher salt from clumping.
(b)
4. Place the supplied filling funnel (b) on the
compartment opening.
5. Add dishwasher salt up to the edge of the
compartment. Water may come out; this
is not a problem.
6. Stir the dishwasher salt using the end of a
spoon or similar.
7. Turn the cover of the dishwasher salt
compartment in a clockwise direction up
to the stop point.
8. Replace the lower dish rack.
9. Launch a dishwashing programme
straight away or carry out a test run im-
mediately upon first use using (see „Test
run“ on page EN-27).