Hanseatic SY-6002C-P3-C84-L32-600, Руководство пользователя, Страница: 39 / 56

Care and maintenance Page EN-11
3. Open the lock (18) on the grease fil-
ters (17), and carefully pull the grease
filters (17) downwards to remove them.
4. Wash the grease filters (17) in a dish-
washer or in the sink like ordinary dish-
ware.
5. Place a grease filter with the pins into the
openings on the left side.
6. Slide the lock to the left; snap the grease
filter in and release the lock.
7. Repeat this step for the other grease filter.
8. Switch the power back on.
Inserting/replacing activated
charcoal filters
The activated coal filters remove odours.
They have to be replaced as soon as the
cooking odours can no longer be adequately
filtered. If used frequently, the filters should be
renewed regularly or at least checked every 6
months. For the source of supply, please see
chapter „Our Service Centre“ on page EN-23.
1. Remove the mains plug from the socket,
or switch off the mains supply using the
corresponding circuit breaker.
(14)
2. Pull the flat panel (14) forwards.
(17)
(17)
(18)
3. Open the lock (18) on the grease fil-
ters (17), and carefully pull the grease
filters (17) downwards to remove them.
4. Only when replacing the charcoal filters:
The two activated charcoal filters (19) are
located to the right and left of the motor
(20).
Push on the filters and turn them anti-
clockwise.
(20) (19) (19)