Assembly
Page EN-14
The model SY-103E6-E14-C29-L12-600
is equipped with two grease filters (15).
The model SY-103E6-E14-C29-L12-900
has three grease filters (15).
(11)
5. Carefully hang the exhaust hood on the
two round-head screws (11) using the
keyhole openings.
6. If necessary, remove the exhaust hood
again to loosen or tighten the screws in
order to ensure that the hood is flush with
the wall.
2x
(12)
7. Turn two round-head screws (12) into the
prepared dowels to secure the exhaust
hood, and screw the exhaust hood tightly
to the wall.
(15)
(14)
(13)
8. Place the grease filters (15) with the pins
into the openings.
9. Push the locks (14) up; snap the grease
filters (15) in and release the locks.
10. Close the cover (13) again and allow it to
click into place. The exhaust hood is now
mounted to the wall.
Attaching the exhaust air hose
The exhaust air hose (4) must be installed if
you intend to use the exhaust hood with ex-
haust air operation.
