Assembly
Page GB-13
4. Open the locks (14) on the grease fil-
ter (15) and carefully pull it downwards to
remove.
(11)
(11)
5. Carefully hang the exhaust hood on the
two round-head screws (11) using the
keyhole openings.
6. If necessary, remove the exhaust hood
again to loosen or tighten the screws in
order to ensure that the hood is flush with
the wall.
2x
(12)
(12)
7. Turn two round-head screws (12) into
the prepared dowels to secure the ex-
haust hood, and screw the exhaust hood
tightly to the wall.
(15)
(14)
(13)
8. Place the grease filter (15) with the pins
into the openings.
9. Push the locks (14) up; snap the grease
filters (15) in and release the locks.
10. Close the cover (13) back down again
and allow it to click into place. The ex-
haust hood is now mounted to the wall.
Attaching the exhaust air
hose
The exhaust air hose (4) must be installed
if you intend to use the exhaust hood with
exhaust air operation.
(9)
(4)
1. Insert the end of the exhaust air hose (4)
with the larger diameter (153 mm) into the
connection with the check valve.