Hanseatic HMKS5144FW, Руководство пользователя

Страница: 50 / 54

Troubleshooting table Page EN-22
Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, please check the tables to see if you can correct the
malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appliance yourself. You can put
your own and future users’ lives in danger. Only authorised specialists are allowed to
carry out this repair work.
Problem Possible cause Solutions, tips
Compressor off,
appliance not re-
frigerating.
No electricity to socket. Check by connecting another appliance.
Mains plug is loose. Check the tightness of the mains plug.
Compressor off,
appliance is cool
inside.
Desired temperature has
been reached.
Further cooling not required. When the in-
side temperature rises, the compressor au-
tomatically switches on.
Appliance cools
too quickly. Temperature controller is set
at too cold a setting. Turn down the temperature controller (see
"Operation" on page EN-10).
The appliance
doesn’t cool suffi-
ciently.
Incorrect temperature select-
ed.
Turn the temperature controller to a higher
cooling position (see "Operation“ on page
EN-10).
Door is not tightly closed or
door seal is not completely
tight.
See "Checking and cleaning the door seals“
on page EN-14.
The appliance is near a heat
source. Insert insulating plate in-between or relo-
cate.
Food has been put in warm. Only put in cooled foods.
Too many goods loaded.
Load no more than 7 kg at once.
Ambient temperature too low
or too high. Adjust the ambient temperature (see "In-
tended use" on page EN-5).
Compressor seems defec-
tive.
Set the temperature controller to “5”. If the
compressor does not switch on within an
hour, please contact our service department
(see page EN-20).
Troubleshooting table