Page EN-22
Cleaning and maintenance
(18)
7. Reinsert the lint filter. Ensure that the ar-
row (18) points in your direction.
Cleaning the heat exchanger
CAUTION!
Risk of injury!
Touching the heat exchanger may lead
to injuries.
■
Do not touch the heat exchanger
with your bare hands.
■
Let the dryer cool down before clean-
ing the heat exchanger.
NOTICE
Risk of damage to property!
Improper handling of the appliance
may result in damage.
■
Only use water to clean the heat ex-
changer, and do not use any hard or
sharp objects to remove lint.
Residual water can leak. Put an
absorbent cloth under the mainte-
nance
fl
ap.
The heat exchanger must be cleaned around
every two months.
(7)
1. Open the maintenance flap (7).
2. Unlock the heat exchanger attach-
ment (19) and remove it.
3. Remove the heat exchanger (8).
(19)
(8)
4. Rinse the heat exchanger (8) from all
sides with a jet of water to remove all lint
entirely. Then drain the water completely.
5. Clean the seals.
6. Reinsert the heat exchanger (8) with the
handle pointing downwards.
7. Reinsert the heat exchanger attach-
ment (19) and lock it.
Содержание HKT7BGT2
Страница 12: ...Seite DE 12 Programmauswahl Programmauswahl Schnelltrocknen Babykleidung Zeit Sparen ...
Страница 45: ...Page EN 12 Cycle selection Cycle selection Schnelltrocknen Babykleidung Zeit Sparen ...
Страница 56: ...Page EN 23 Cleaning and maintenance 7 8 Close the maintenance flap 7 until you hear it snap shut ...