Page EN-31
Installation, assembly, connection and initial commissioning
(c)
3. Remove the protective films from the
side end profiles (c).
4. Affix the end profiles to the left and right
edges of the dishwasher. This will pre-
vent a crack being visible between the
dishwasher and the adjacent kitchen
cupboards.
5. Push the dishwasher into the recess.
6. The height of both front feet and the
back foot of the appliance can be adjust-
ed in order to level the dishwasher.
The front feet are equipped with slots.
Insert a screwdriver into one of the slots
and use it to turn the appliance feet to
the desired height.
7. With the help of the middle adjustment
screw you can adjust the height of the
rear appliance foot. Use a Phillips-tip
screwdriver for this.
8. Check the alignment with a spirit level.
9. Make sure that the top edge of the dish-
washer is up to the bottom edge of the
worktop to prevent it from tipping forward
when you open the dishwasher door.
(g)
(j)
(h) (i)
10. Screw the appliance to the kitchen unit.
– If you have granite worktops, remove
the internal side cover caps and screw
the appliance to the adjacent kitchen
cupboards. Cover the screws again
with the cover caps.
– For all other worktops, screw the
mounting bracket (g) firmly to the
worktop.