Hanseatic HGS 8555A1, Руководство пользователя

Страница: 44 / 52

Start-up Page EN-18
7. Place the cover back onto the freezer,
ensuring that the temperature controller 1
fits in the designated opening again. Push
down on both sides (left and right) of the
front of the cover until you hear it click into
place.
8. Screw the two screws tightly back onto
the cover. To do this, use a cross-head
screwdriver. Replace both screw covers.
9. Tip the freezer backwards (maximum
45°) so that you can also move the lower
door hinge.
10. Unscrew both front screw feet.
11. Unscrew the lower hinge plate. To do
this, use an 8 mm spanner or a cross-
head screwdriver.
1.
12. Turn the hinge plate. Loosen the hinge
bolts with a 10 mm spanner. Loosen the
screws and reinstate the screws and the
hinge bolts from the other side.
13. Screw the hinge plate tightly back onto the
opposite side. Make sure that the hinge
pin is in the hinge bushing of the door.
The door will now function properly
again.
14. Screw both adjusting feet securely back
onto the freezer.
15. Carefully stand the freezer upright.
16. Reinsert the blind plug on the opposite
side of the door.
You have successfully changed the door
hinges.