Page EN-35
Troubleshooting table
Troubleshooting table
Problems with operation
Problem
Possible cause
Solution
Signal tones must
sound
This is not an appliance fault. See „Signal tones“ on page EN-23.
The display will switch
off.
This is not an appliance fault. See „Display“ on page EN-23.
The appliance door
will open automatically.
This is not an appliance fault. The door opens automatically at
the end of a programme run to allow the hot steam to escape.
The dishwasher can-
not be switched on.
The mains plug has not been
inserted into a socket.
Connect the mains plug to a
properly installed socket.
There is no voltage being sup-
plied through the socket.
Check the fuse. Check the
socket by connecting another
device.
Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, please check the tables to see if you can correct the
malfunction.
WARNING!
Risk of electric shock in case of improp-
er repair!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
■
Only authorised specialists may
repair the dishwasher. If in doubt,
contact our service department
(see page EN-39).
■
Only carry out the actions which are
described in this user manual.
■
Never repair defective dishwashers
– or dishwashers which you presume
to be defective – yourself. You can en-
danger yourself and subsequent users.
NOTICE
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■
If water overfl ows, switch off the wa-
ter supply immediately and then con-
tact the service team (see page EN-39).
■
If the water has overfl owed, remove
any water standing in the dishwasher
before restarting a wash programme.
