Page EN-31
Installation, substructure, connection and initial use
(c)
3. Affix the condensation protection film sup-
plied (c) to the underside of the worktop.
In this way, you will avoid damage to the
work surface as a result of hot steam
which may be emitted from the dishwash-
er if the dishwasher door is left open.
4. Place the dishwasher in the desired
position.
(26)
5. In order to equalise unevenness in the
floor and set up the dishwasher on a level
horizontal base, you can screw the four
appliance feet (26) in or out. There are
slots in the appliance feet around the cir-
cumference. Insert a screwdriver and turn
the appliance foot.
Use a spirit level to set up the dishwasher.
Water hardness
Determine water hardness
In order to determine the water hardness in
your place of residence, you can
– look on the website of your water provider.
– telephone your water supplier.
– purchase suitable test strips at the
pharmacy.
Water hardness in
your household in
°dH
Water hardness in
the dishwasher
0-5
H1
6-11
H2
12-17
H3
18-22
H4
23-34
H5
35-55
H6
1. Obtain the appropriate setting from the
table above.
2. Close the dishwasher door.
(1)
(6)
(8)
3. If the dishwasher is switched on, switch it
off with the button (1).
