Operation
Page EN-11
Before getting started
• Read the chapter “Safety” on page EN-4.
• Set up and connect the appliance as
described in chapter “Start-up” on
page EN-22.
Switching the appliance on
and off
Switching on
• Turn the temperature control dial (9) to a
position between “1” and “7”.
The interior light (10) comes on.
The appliance is switched on.
Switching off
• Turn the temperature control dial (9) to
“0”.
The interior light (10) goes out. The appli-
ance is switched off.
If the appliance makes disturbing nois-
es after it is switched on, check that it
is in a stable position and correctly in-
stalled.
Operation
Setting the temperature
WARNING
Health hazard!
The appliance may not operate proper-
ly if exposed to low ambient tempera-
tures for extended periods of time. This
can then lead to an increase in temper-
ature in the fridge and freezer compart-
ment.
■
Always ensure the ambient tempera-
ture is kept within the specifi ed range
(see “Intended use” on page EN-4).
If you set a lower temperature, you will
require more power. This increases
energy consumption.
(9)
3
4
5
• Use the temperature control dial (9) to
set the temperature.
When the temperature control dial is
turned to “0”, the compressor stops
running and the interior light goes out.
