Operation
Page EN-10
Requirements for safe use
– You have read chapter „For your safety“ on
page EN-5 and understand all the safety
notices.
– The appliance is installed and connected
as described in chapter „Start-up“ on page
EN-21.
Commissioning the appliance
NOTICE
Risk of damage to property!
If the appliance has been transported
horizontally, lubricant from the
compressor may make its way into the
cooling circuit.
■
If possible, do not tilt the cooling
appliance horizontally.
■
Allow the appliance to stand upright
for 2 hours before starting it up. This
is to ensure that the lubricant has
enough time to flow back into the
compressor.
The appliance is factory-set to switch
on automatically when you first insert
the mains plug into the socket.
• Switch off the fuse for the mains socket
to which the refrigerator is connected. A
signal tone will sound, and the refrigerator
light (7) will illuminate when the door is
opened.
Operation
Switching the appliance on
and off
Switching on
Adjust
Mode
Super
Smart
1
4
2
3
5
(1)
( )
• Press and hold the Adjust button (1) for 5
seconds.
A signal tone will sound and the refriger-
ator light (7) will illuminate. The appliance
is switched on.
If the appliance makes disturbing nois-
es after it is switched on, check that it
is in a stable position and correctly in-
stalled.
Switching off
Adjust
Mode
Super
Smart
1
4
2
3
5
(1)
( )
1. Press and hold the Adjust button (1) for
5 seconds.
A signal tone will sound and the refriger-
ator light (7) will go out. The appliance is
switched off.
2. Empty the appliance and clean it as
described in chapter „Care and mainte-
nance“ on page EN-18.
Содержание HEKS 12254GA2
Страница 64: ......
