Start-up
Page EN-13
Start-up
The correct place to put the
appliance
The appliance should not be positioned di-
rectly next to a refrigerator or deep freezer.
The heat emitted from the appliance would
cause unnecessarily higher energy con-
sumption by the fridge or freezer.
There must be a minimum spacing of 2 m
from radio devices and televisions to ensure
that the reception is not distorted.
The base upon which the appliance should
be positioned must be level, sufficiently sta-
ble and heat resistant.
When selecting a location for the appliance,
please ensure to choose a place away from
heat, steam or high air humidity. The appli-
ance may not be used outdoors.
Please ensure that no highly flammable ma-
terials are located in the vicinity of the appli-
ance.
The socket must be near to the appliance
and easily accessible, in order that the plug
can be quickly pulled out in the event of any
malfunction.
In order to ensure sufficient air circulation,
the following minimum lateral and vertical
distances must be complied with:
Upwards:
30 cm
Backwards:
0 cm
To the left:
20 cm
To the right: 20 cm
As measured from the base, the installation
height must be at least 85 cm.
Cleaning before use
• Please clean the appliance before its
first use (see „Care and maintenance“ on
page EN-26).
Inserting the turntable
(2)
(4)
(3)
1. Position the turntable drive (4) in the hole
in the middle of the cooking chamber
floor. Turn the turntable drive slightly so
that it slots into place and can no longer
be turned.
2. Position the roller ring (3) centrally into the
recess in the cooking chamber floor.
3. Place the turntable (2) centrally on the roll-
er ring. Turn the turntable slightly as need-
ed so that it slots into the turntable drive.
Please note:
• Never use the oven without the turntable.
• Always place the cooking container or the
grill rack on the turntable. This ensures
that the microwaves are distributed even-
ly, and that any liquid overflow from the
food into the appliance is avoided.
Содержание AG720CE6-PM
Страница 34: ...Technische Daten...