Troubleshooting table
Page EN-30
Problem
Possible cause
Solutions, tips
The dish does not
get sufficiently
hot.
The power or time is set too
low.
Heat the dish for a little more time in the
appliance.
The dish was very cold
when being placed inside.
Container is unsuitable if
it becomes hotter than the
dish.
Use a suitable container.
The cooking
chamber door
and/or viewing
window steams
up.
The dish releases moisture. Not a defect. Simply wipe away any
moisture after operation.
Buttons don't
respond when
pressed.
Safety lock is enabled.
Press and hold the “Pause/Stop”
button (12) for 3 seconds (see also the
chapter “Safety lock” on page EN-14).
Fan continues to
run after cooking
time has finished.
This is a feature of the
appliance’s cooling system,
and does not signify a
defect.
No measures required. The fan will
automatically switch off after no more than
3 minutes.