HEKS8854F
Start-up
20
Connecting the refrigerator
NOTICE
Risk of damage!
If the refrigerator has been carried on its side for an
extended time, lubricant from the compressor may
have got into the refrigeration circuit.
• In this case, leave the refrigerator in its normal po-
sition for 2 hours before switching it on. This allows
the lubricant enough time to flow back into the com-
pressor.
1. Clean every part of the refrigerator before turning it on for
the first time. (See section “Cleaning and maintenance” on
page 24.)
2. Dry the refrigerator thoroughly afterwards.
3. Insert the shelves
3
,
4
and
7
at the desired heights.
4. Connect the mains plug to a properly installed earthed socket
(see “Technical specifications” on page 29).
5. Open the door.
6. Turn the temperature controller
2
to ‘7’. The lighting will turn
on, the compressor will start running after a short while, the re-
frigerant will start flowing through the piping, and you will hear
a slight noise.
Start-up
Содержание 19677946
Страница 30: ...HEKS8854F 30 ...
Страница 60: ......