Start-up
Page EN-19
CAUTION
Fire hazard!
Improper handling of the appliance
can lead to fi re and property damage.
■
Only connect the appliance to a
properly installed and earthed elec-
tric socket. Do not connect to a multi-
socket extension cable or a multi-
socket plug.
NOTICE
Risk of damage!
If the refrigerating appliance has been
transported horizontally, lubricant from
the compressor may get into the cool-
ing circuit.
■
Allow the appliance to stand upright
for approx. 2 hours after transport
and before connecting. This allows
the lubricant enough time to fl ow
back into the compressor.
1. Insert the mains plug into an easily ac-
cessible and properly installed socket
(220–240 V~ / 50 Hz).
2. Turn the temperature controller (6) to a
value higher than ‘0’.
The compressor starts to work, the refrig-
erant flows through the pipes and a quiet
humming sound can be heard. The appli-
ance is switched on.
You will find all important information
about operation from page EN-10.
