HANSCRAFT SPATOUCH 2, Руководство пользователя

Страница: 14 / 24

14
Trouble shooting
M015
The sensor balance is off
The temperature sensor synchronization can be off by 60.98 °F up to
61.88 °F. Call the repair service.
M026
The sensor balance is off
The sensors are not synchronized. The report is displayed longer than
1 hour. Call the repair service.
M031 (A)
M032 (B)
Sensor A failure, sensor B failure
Temperature sensor or electrical circuit sensor had failed. Call the repair
service
communication
failure
The control panel does not receive reports from the system. Call the
repair service.
test
software
Test software is installed
Both the control system and the test system are running at the same
time. Call the repair service.
°T degrees
°F or °C are replaced by °T degrees
The control system is running in a test mode. Call the repair service.
SENSOR RELATED REPORTS
NON-CLASSIFIABLE REPORTS
M022
Memory failure – control fail summary
The programmed failure test has failed during the system start-up.
M021
The setting were reset (permanent memory error)
Contact your seller or repair services if this report is displayed more than
once during one start-up.
M020
Timer failure
Contact your seller or repair services.
SYSTEM RELATED REPORTS
Checking the water flow
Check whether the water flow is not too low, whether there is an obstacle in the
area of water suction, whether the valves are not closed, check for air pockets and
too many closed jets. Some devices can occasionally turn on by themselves to enable
temperature monitoring or requested freeze protection, even when the hot tub is
turned off.