HANSCRAFT HOT TUB WAVE, Руководство пользователя

Страница: 4 / 12

4
Hot Tub Wave installa�on prepara�on
2 Hot Tub Wave installa�on prepara�on
2 .1 Prepara�on for installa�on and electrical connec�on of the Hot Tub Wave
2.2 Preparing the site for Hot Tub Wave installa�on
NO YES
Check the Hot Tub Wave before use! If any part is damaged or missing,
contact the dealer immediately! Make sure all components are in
conformity with your order. Check the Hot Tub Wave before each use.
In case of damage to the Hot Tub Wave, do not use!
The Hot Tub Wave must be installed on a level, sufficiently solid base slab, taking
into account the load-bearing capacity of the building. When installing the Hot Tub
Wave, we recommend it in the exterior, a concrete monolithic base slab with a minimum
thickness of (thickness) of 10 cm. The load-bearing capacity of the founda�on slab must
always be selected with regard to dimensions and weight of the Hot Tub Wave. Consult
your building supervisor. The weight is is given in the technical descrip�on of the Hot Tub
Wave. Hot Tub Wave with PLUG & PLAY are supplied by us for electrical connec�on
of 1× 230 V with installed, current protector and wire.
If a Hot Tub Wave is installed, safety precau�ons must be observed. Basic requirements
for the safe opera�on of the Hot Tub Wave are primarily non-slip floors, drainage of the
installa�on site in case of rainfall and overflow of water from the Hot Tub Wave.
We therefore recommend that the installa�on site is adapted to these condi�ons