Hansa ZWM 628IEH, Руководство по эксплуатации

Страница: 23 / 28

23
ERROR CODE
DESCRIPTION OF THE
FAULT
ACTION
E1 Longer inlet time.
• Faucets is not opened, or water
intake is
restricted,or water pressure is too
low
E4 Overflow. • Some element of dishwasher leaks
E8 Divider vale failed • Divider vale failed
One of programme indicators lights up and the
Start/Pause indicator flashes
• The dishwasher door is open — close the
door.
If the programme won't start
• Make sure the plug is properly inserted into
the wall outlet.
• Check the fuses in the electrical system
• Make sure that the water supply valve is open.
• Make sure that the door is closed.
• Make sure that the dishwasher is turned off by
pressing the On/Off button.
• Make sure that the water supply filter and dish -
washer filters are clean.
If the indicators do not go out after washing
• You did not press the On/Off button.
• If the there is residue detergent in the dis-
penser
• Detergent was added to wet dispenser.
If there is water in the dishwasher when pro-
gramme completes
• Water drain hose is clogged or kinked.
ERROR CODES AND TROUBLESHOOTING
• The filters are clogged.
• The programme not yet completed.
The dishwasher stops during a washing pro-
gramme
• Power failure.
• No water supply;
• The program can be paused.
You can hear clinking noises inside the appli-
ance
• The dishes are arranged incorrectly.
• Spray arm hits the dishes.
If food residue remains on the dishes
• Dishes are improperly loaded into the dish-
washer and the water does not reach every-
where.
• Basket overloaded.
• The dishes touch one another.
• A very small amount of detergent was added.
• Unsuitable, gentle washing programme se-
lected.
• Spray arm clogged with food residue.
• Clogged filters.
• Filters improperly fitted.
• Drain pump clogged.
If white spots or streaks appear on the dishes
• Very small amount of detergent was added.
• Low dose of rinse aid.
• You are not using special salt, in spite of the
Programme indicators:
a) all indicators off — standby
b) one programme indicator lights steady — programme paused pause or waiting to start the
programme
c) one indicator flashing — programme in progress, the appliance operates
d) an indicator is flashing fast — error (see the following table)