Hansa ZIM656PH, Руководство по эксплуатации

Страница: 34 / 52

TROUBLESHOOTING
34
3. Larger residues can be rinsed under running water. Clean the filter completely with a soft,
clean brush.
4. Install the filters in reverse order, place the filter insert and turn clockwise as indicated by
the arrow.
WARNING
Do not overtighten the filters. Carefully replace the filters and install in place. Otherwise,
contaminants can enter the dishwasher's systems and cause clogging.
NEVER use the dishwasher without the filter assembly. Incorrect filter replacement can
reduce the appliance effectiveness and cause damage to the dishes and cutlery.
3
Spray arms
It is necessary to clean the spray arms regularly for hard water chemicals will clog the
spray arm jets and bearings.
To clean the spray arms, follow the instructions below:
1. To remove the upper spray arm, hold the nut in the center still and rotate the spray arm counter-
clockwise to remove it.
2. To remove the lower spray arm, pull out the spray arm upward.
3. Wash the arms in soapy and warm water and use a soft brush to clean the jets. Replace them after
rinsing them thoroughly.