Hansa ZIM 676 H, Руководство по эксплуатации

Страница: 14 / 32

14
PREPARE THE APPLIANCE FOR OPERATION
Water hard-
ness
German de-
grees [dH]
French de-
grees [dF]
British degrees
[dE]
Water hard-
ness level
indicator
Salt consump-
tion [g/cycle]
1 0~5 0~9 0~6 H1-Rapid 0
2 6-11 10-20 7-14 H2-90 Min 9
3 12-17 21-30 15-21
H3-90 Min and
Rapid
12
4 18-22 31-40 22-28 H4-Glass 20
5 23-34 41-60 29-42
H5-Glass,
Rapid
30
6 35-55 61-98 43-69
H6-Glass, 90
Min
60
If the water hardness is higher than the maximum values given in the table above, or if you use water
from a deep well, it is recommended to use filters and water treatment equipment.
NOTE: The factory settings are for the water hardness level 4.
Water hardness table
The use of detergents
Use a detergent for domestic dishwashers.
On the market you can find detergent in -
tended for dishwashers in the form of pow-
der, gel and tablets. The detergent must be
placed in the dispenser before starting the
dishwasher. Store detergent in a cool and
dry place, out of reach of children.
Do not overfill the detergent dispenser,
otherwise the detergent may not dissolve
completely and leave streaks on the
dishes.
If you need more information on the deter-
gent used, please contact the manufac-
turer directly.
i
1 2
Open the door, turn on the appliance using
the On/Off button.
Within 60 seconds of turning on the dish-
washer, press and hold the programme
selector button for more than 5 seconds
(salt and rinse aid indicators will blink
alternately).
Within 5 seconds, press the programme
selector button repeatedly to select the
appropriate setting for your region. The
following settings are available: H1-H2-H3-
H4-H5-H6.
Press the button or do nothing for 5 sec-
onds to confirm the setting.
P
P