11
The timer will be increased by half an hour timely and sum to the 8 hours finaly.
The press of time slot must be in 5 seconds, otherwise the timer setting is finished
automatic.
The “timer” LED stop flashing after finishing the seting. When all finger lights are
off, the fan will stop.
Timer for ON, Must press the timer when the fan is off
Timer for OFF, Must press the timer after the fan is on.
6. “OSC” key
After the fan has started, press this key to select oscillation mode. The sequence
is wiggly,fluctuating, eight-rock and fixedly. The lights on the display can indicate fan
oscillation mode.
7. “PRO” and “SET” key
Optional ON and OFF during the 8 hours.
Press the “pro” key, the time dial is on. The first finger light is flashing, then press
the “set” key repeatedly to select the light on/off during the first half an hour.
After setting the first finger light, press the “pro” to set the second finger light, the
second finger light is flashing. You can choose the light on/off during the second half
an hour.
You can choose optional ON or OFF during 8 hours referring to the above
operation.
If the last finger light is on/off, the fan is on/off after program timer.
Fig.6
b
. BATTERIES
(battery not included in the packing)
(1) Slide the battery compartment Cover.
(2) Insert the batteries, and make sure that the
batteries are placed as shown in the Fig.6.
(3) Slide back the battery cover.
NOTES:
Use size “AAA” manganese or alkaline
batteries. Do not use rechargeable batteries.
c. BATTERY WARNING AS BELOW
1. “Do not dispose of batteries in fire, batteries may
explode or leak.”
2. -Do not mix old and new batteries.
3. -Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
d. REMOTE CONTROLLER OPERATION
Point the remote controller at the receptor on body of the fan and press the desired
button. The remote controller will work at distances of up to roughly six meters and
