Hansa BHI 6 Series, Инструкция по эксплуатации, Страница: 51 / 88

51
OPERATION
When the set cooking time has elapsed, you will hear an alarm beep. Touch any
sensor to mute it or the alarm will turn off automatically after 30 seconds.
If you want to cancel the timer ahead of time, activate the desired cooking zone by
touching its sensor (the power indicator will flash), then cancel the timer as follows:
• touch and hold the sensor;
• touch to reduce the time to “00”;
• simultaneously touch and hold and .
To cancel the Timer touch (heat setting indicator will flash), then touch and hold
for 3 seconds or touch to activate the desired cooking zone, then touch
and use to reduce the time to “00.”
To cancel the Timer you can also simultaneously touch and hold and for 2
seconds.
Minute Minder
Use Minute Minder to count down time. The Minute Minder does not affect the ope -
ration of cooking zones.
To set the Minute Minder:
• Turn on the hob.
• Touch and set the Minute Minder duration by touching to add duration
and to reduce duration.
The Duration setting can be changed at any time. To do this, touch and
then use or .
When the set Duration has elapsed, you will hear an alarm beep. Touch any sensor
to acknowledge and mute it. The alarm goes off automatically after 30 seconds.
To cancel the Minute Minder touch , then touch and hold to reduce the
duration to “00.” or, alternatively, simultaneously touch and hold and .
The Stop’n go function
The Stop’n go function simultaneously suspends operation of all cooking zones
and then resumes at the heat settings that were previously set.
In order to activate the Stop’n go function, at least one cooking zone must be in
use.
Touch the sensor. All cooking zone displays will show the symbol. When a
cooking zone is hot the symbol will flash alternately with the letter "H" or "h",
depending on cooking zone temperature (residual heat indicator).
To deactivate the Stop’n go function touch the sensor again. Cooking zone
displays will show the heat setting that was previously set before activation of the
Stop’n go function.
The Stop’n go function pauses the Timer countdown
The Stop’n go function does not pause the Minute Minder countdown
i
i