SKUD 18
Owners’ Guide
18
Seat Steering
Fit the short tiller arms by depressing the spring clip and sliding into the rudder box
tube. Rotate until the spring clip pops up in the locator hole. Ensure the universal
fittings on the forward part of the tiller arms are both facing inboard. Attach the
adjustable tie-rod to both tiller arms using the universal fittings (slide in and clip on the
cover), making sure the central universal fitting faces forward. Attach the double block
to the central universal fitting. Reeve steering lines as required.
Adjusting the Tie Rod
Disconnect the universal fitting and rotate the end section to make longer or shorter.
Tape in desired position.
