Hans Grohe Talis'C 33143000, Руководство по сборке, Страница: 17 / 176

4
Important! The fitting must be installed, flushed
and tested after the valid norms!
Assembly
1
Flush through the supply pipes.
2 Fasten the mixer with the washers.
The hot and cold supplies must be of equal
pressures.
Operation
The mixer is activated by lifting the lever handle.
Turning to the left = warmer water,
turning to the right = cooler water.
32420000: The flow is changed from bath to
shower function by pulling the knob at the upper
side of the spout. After shutting off the water
flow, the mixer returns automatically to the bath
function.
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure: 0,1 – 0,5
MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bars = 147 PSI)
Hot water temperature:
max. 80° C
Recommended hot water temp.: 65° C
Centre distance: 153 mm
Connections G ½": cold right - hot left
Connections G ¾“
Connections G ½“
Rate of flow: ca. 20 l/min 0,3 MPa
anti-pollution function
Hansgrohe single lever mixers can be used
together with hydraulically and thermically
controlled continuous flow heaters if the flow
pressure is at least 0,15 MPa.
To adjust the hot water limiter on single lever
mixers, please see page 6.
No adjustment is necessary when using a
continuous flow water heater.
Important!
The non return valves must be checked regularly
according to DIN EN 1717 in accordance with
national or regional regulations (at least once a
year).
Spare parts see page 3
1 handle
33092000
1.1 screw cover 96338000
2 flange 96656000
3 nut 96690000
4 cartridge cpl. 92730000
5 locking screw for handle 96059000
6 aerator 13956000
7 selector assy 94077000
8 diverter knob 96466000
9 non return valve DW 15 (10) 94074000
10 hose connection 96044000
Test certificate
DVGW P-IX SVGW ACS NF WRAS KIWA
33163000 X
English