2
English
Technical Information
Recommended water pressure
15 - 75 PSI
Max. water pressure
145 PSI
Recommended hot water temp. 120° - 140° F*
Max. hot water temp
176°F*
Flow rate - 71744xx1, 32327xx1, 72414xx1,
31527xx1, 32557xx1
handshower
1.8 GPM (6.8 L/min)
Flow rate - 31404xx1, 31433xx1, 31408xx1,
32557xx1, 74555xx1
handshower
1.75 GPM (6.6 L/min)
Flow rate - 71748xx1, 32314xx1, 72419xx1,
31444xx1, 31446xx1, 31448xx1, 31733xx1,
32553xx1, 74553xx1
handshower
2.0 GPM (7.6 L/min)
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• The four-hole trim sets require rough 06646000
(not included). The three-hole trim sets require
rough 06607000 (not included).
•
Four-hole models only:
Protection against
backflow is provided by a check valve in the
handshower elbow and by an automatically
resetting diverter.
•
1.75 GPM models only
:This showerhead
is for use with an automatically compensating
valve rated at 1.3 GPM (4.9 L/min) or less.
•
1.8 GPM models only
:This showerhead is for
use with an automatically compensating valve
rated at 1.4 GPM (5.3 L/min) or less.
•
2.0 GPM models only
: This handshower
is for use with automatic compensating valves
rated at 1.5 GPM (5.7 L/min) or less.
• This unit is not anti-scald. In Massachusetts, or
if required by local plumbing code, install an
approved remote pressure balance valve or
other approved anti-scald device.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
