2
English
Technical Information
Water pressure
Recommended
15 - 75 PSI (0.1 - 0.5 MPa)
Maximum
145 PSI (1 MPa)
Hot water temp.
Recommended 120°-140° F (48° - 60° C)*
Maximum
158°F (70° C)*
Max. flow rate
04310xx1, 04920xx0
1.5 GPM (5.7 L/min)
04921xx0
04505xx0, 14877xx1, 1.75 GPM (6.6 L/min)
04286xx0, 04247xx0,
14872xx1, 04506xx1
Hole size in mounting surface
1½" (38 mm)
Max. depth of mounting surface
14877xx1, 04286xx0
2⅜" (60 mm)
04310xx1, 14872xx1,
04247xx0, 04505xx0,
2¾" (70 mm)
04506xx1
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• Protection against backflow is provided by two
check valves.
• The hot and cold supply hoses included with this
faucet are for use with ⅜ stops. If your stops are
a different size, purchase adapters at your local
plumbing supply store or home center. Adapters
are not available from Hansgrohe.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
