Installation Considerations
For best results, Hansgrohe recommends that this unit be installed by a licensed, profes-
sional plumber.
Please read over these instructions thoroughly before beginning installation. Make sure
that you have all tools and supplies needed to complete the installation.
The high temperature limit stop may be reset, if desired.
•
•
•
Technical Information
Recommended water pressure
14.7 - 7.5 psi
Recommended hot water temp.
10
�
- 140
�
F*
Max. hot water temp
165
�
F*
Hole size in mounting surface
1-1/4”
Max. mounting surface depth
1 5/8”
Flow rate
. gpm
M3 Cartridge with high temperature limit stop
3/8” supply hoses - requires 3/8” compression fitting (not included)
Listed by IAPMO
Approved for use in Massachusetts
*Please know and follow all applicable local plumbing codes when setting the temperature on the water heater. In
Massachusetts, the water heater may be set no higher than 11
o
F.
Solaris E
06631XX0
Stratos E
06575XX0
Metro E
06571XX0
Single Control Lavatory Faucet
Solaris E
06631XX0
Stratos E
06575XX0
Metro E
06571XX0
English
