1
English
Adjust the Rotational Limit Stop
Adjust the rotational limit stop if:
The maximum output temperature is greater
than 120°F or that permitted by local plumb-
ing code
The temperature of the incoming hot or
cold water supply changes seasonally, or if
changes are made to the water heater.
•
•
Turn the rotational limit stop, clockwise to make
the water cooler, counter-clockwise to make it
warmer.
Depending on local conditions, each notch repre-
sents a change in temperature of 4°F - 16°F.
Continue the installation.
Lift the cartridge out (1).
Turn the cartridge 180°, so that the "hot side"
marking is on the right (2).
Install the cartridge (3)
Install the nut (4).
Continue the installation.
1
2
3
2
4
Ø